high quality ptfe coating for cookware

Water-based Non-stick low friction coefficient Food industry level Anti-corrosion Using below260degree ce

  Technical parameters of Water-based non-stick coating/PTFE coating

  

1. Introduction and Achieved Certificate

  This PTFE non-stick paint is double-layered, and has extraordinary characteristics of 

  non-stick and anti-corrosion, etc, complying to 

  GB 

  America FDA standard 

  Germany LFGB standard

  EU ROHS 

  2. Technical Parameter:

  2.1 curing temperature and time:10min @380°C or 5min @400°C

  2.2 paint thickness: 8-10um prime, 12-17um finished paint, total film thickness of 25um

  2.3 Hardness: H-3H

  2.4 viscosity(Lwata No. 2 cup, 25°C): prime≥ 30 seconds, finished coating≥15 seconds.

  2.5 adhesive force: heat in boiled water for 15min, then use griding methods and cross

        ten times, check that the film does not peel off.

  2.6 salted water resistance: pour 10% salted water in the non-stick pan, then heat until boiling and last for 8hrs. Do it three times every 16hrs, no bubble appears.

  2.7 acid resistance: pour 13% hydrochloric acid into the non-stick pan, then heat until

  boiling, and let it boil for 15 min, then leave it for 40min, no bubble appears.  

  2.8 dry up: heat for 10 days @220°C, no powdering. (peak value should not exceed  

  260°C) 

  2.9 non-stick property: heat the non-stick pan to 230-240°C, then add the egg onto the 

  Center of the pan, do not stir up and turn over. Wait until the egg turns white fully, then

  use the fork to peel off the whole fried egg from the side and bottom,the fried egg could  

  peel off fully. 

  3. Storage and Use direction:

  3.1 water-based, prevent from freezing.

  3.2 stir thoroughly before applying.

  4. Package:

    20-35kgs/plastic drum.

Other types of water-based non-stick paint for cookware with different parameter offered on your requirements.

Oil-based non-stick coating also offered!

Thanks for you attention.

high quality ptfe coating for cookware